Notes for this review:
For the general background of the Kongo class, please see the review of the Kajika Kongo. This kit uses many of the
same components as the Kajika kits of Kongo, Hiei, and Haruna; the differences between the kits are noted under
each section and summarized at the end of the review. All the photos in this review are of the Kirishima kit.
Background – Home built Battlecruiser:
The technology transfer stipulated as part of the contract signed with Vickers to build the Kongo was
very successful for Japanese Industry. In March 1912, with Kongo yet to be launched, the private yard of
Mitsubishi Nagasaki began construction of the Kirishima, the fourth and last of the Kongo class
battlecruisers. The ship was named for an active volcano in southern Kyushu.
Launched on Dec 1, 1913 and accepted into service April 19, 1915, the same day as her sister Haruna,
her total construction time was 37 months which matched that of Haruna. This was only 5 months
longer than the construction time of Kongo at the vastly more experienced and equipped Vickers yard.
All of the 14” guns were imported complete from Vickers. The plates for the main side armour belt were
produced in Japan; the rest of the armour plate was imported from Vickers. She was fitted with 36
Yarrow type large tube boilers; her engines were Parsons turbines built by Mitsubishi. Kirishima and
Haruna were almost identical twins; both were equipped with the rounded main gun turrets which
along with the raised fore funnel clearly distinguished them from Kongo.
Kirishima spent World War One mainly in port and on patrols off China and Korea. It is a great pity that
she was not lent to the Royal Navy which offered to lease all four Kongo’s as she would likely have seen
action at the Battle of Jutland, one of the great ‘what ifs’ of naval history.
Kirishima was modernized twice: from January 1927 to April 1930 and from November 1934 to June
1936. She emerged with a radically different profile with only two funnels, a massive forward pagoda,
more armour, new boilers and engines which upped her speed to 30 knots, and a stern lengthened by
25 feet. All the improvements made her a valuable fleet unit capable of providing close escort to the
aircraft carrier fleet.
Until committed to the Guadalcanal shore bombardments that led to her demise, Kirishima operated
exclusively as part of the Japanese Carrier Striking Force that rampaged across the Pacific at the
beginning of the Pacific War. At Pearl Harbour, Rabaul, Port Darwin, south of Java, and on the Indian
Ocean raid, Kirishima screened the carriers from surface and air attack. Her one surface operation was
against the USS Edsall, an old four stack destroyer that inadvertently stumbled across the Carrier Striking
Force on March 1, 1942 while attempting to escape from Java. Kirishima and her sister Hiei did not
cover themselves in glory as they fired over 200 14” rounds at the diminutive ship in broad daylight
without scoring a hit. Edsall was brought to a standstill by carrier dive bombers and then despatched by
the cruisers Tone and Chikuma.
She continued with the carriers at the Battles of Midway, Eastern Solomons, and Santa Cruz. At Midway
her crew could only look on as all four Japanese carriers succumbed to US dive bomber attacks; she later
returned their survivors to Japan.
On the night of November 13, 1942 Kirishima and Hiei were part of a large surface force sent to
bombard US held Henderson Field on Guadalcanal. They were intercepted by a defending US force of
cruisers and destroyers and the resulting battle quickly disintegrated into a confusing melee fought at
extremely close range. At battle’s end, Hiei was crippled with damage to her steering gear; Kirishima
had only received one 8” shell hit while mauling cruiser San Francisco. Attempts by Kirishima to tow her
sister ship clear failed and Hiei was scuttled in the early evening, having undergone heavy air attacks all
day which inflicted more damage.
Two nights later on November 15, Kirishima was at the centre of another bombardment force sent to pound Henderson Field into submission. This time her opponents were the US battleships South Dakota and Washington and their four escorting destroyers. Kirishima was able to inflict superstructure damage to South Dakota and her escorts sank three of the four US destroyers. The Washington was undetected by the Japanese until she opened fire on Kirishima. Hit at point blank range by at least nine 16” shells and possibly by as many as twenty, Kirishima was badly damaged. Both forward turrets were destroyed and the after pair were jammed. Flooding occurred below decks due to hits below the waterline, the steering gear room flooded, the rudders were jammed, and fires raged in the superstructure. Kirishima was left to circle helplessly until the engine rooms flooded and the ship was abandoned, capsizing rapidly to port and sinking at 3:23 AM.
Her wreck was discovered by Robert Ballard in 1992, lying upside down with the tip of the stern broken
off and the forward part of the ship completely destroyed. It is likely that a magazine explosion
occurred after she was lying on the bottom due to the implosion of a magazine compartment. An
excellent analysis of the damage and sinking can be found here:
In 1/700 scale, this features Kirishima as built and how she appeared from 1915 to 1920. This is not a
simple re-packaging of the Kongo, Hiei, or Haruna kits; it accurately reflects the differences between
Kirishima and the other three ships.
The kit comes in a well-constructed box featuring a painting of Kirishima alongside a jetty, possibly in the
final stages of fitting out.
The sides of the box contain a condensed ship’s history and pictures of the Hiei and Haruna kits.
The kit comprises 375 parts on seven sprues with all parts moulded in medium grey and individually
sealed in plastic bags. The hull, waterline plate, forecastle deck, quarterdeck, and bridge parts are single
pieces not attached to any sprue. There is no photo-etch.
Kongo’s masts are on their own sprue and are in a small box; those for Kirishima are on the new sprue ‘X’ that was
developed for the Hiei kit.
—– Box Art —–
—– Contents of box —–
The starboard and port hull sides are in one piece and scale out just four feet short of the actual length
of 705 feet. There is just a waterline plate – no lower hull is included.
The hull is loaded with exquisite detail: the many doors have hinges, the portholes have ‘eyebrows’, the
armour belt amidships is well defined, there is clearly defined hull plating running fore and aft, the
secondary casemates are crisply moulded, and there is a torpedo net shelf. Raised lugs run along the
length of the hull for attaching the torpedo net booms.
Kirishima’s hull is the same as the one used for Hiei and Haruna. Kongo’s hull has ladder rungs just aft of the
anchors; these are not present on the Kirishima hull. At the stern, Kirishima has more portholes, while Kongo has
doors for square ports which are not on Kirishima. Kongo’s waterline plate is molded in red, Kirishima’s in grey.
—– Hull and waterline plate —–
—– Hull from above —–
The main decks are in two pieces. The forecastle deck has bulkheads already attached where it overlaps
the quarterdeck and the level of detail is quite amazing. Individual deck planks, anchor chains, cable
reels, ready-use ammo lockers, coaling ports, bollards, capstans, and boat chocks are all present in very
precise detail. The fit between the two pieces is extremely precise; the bulkheads feature portholes and
—– Forecastle deck (above) and quarterdeck (below) —–
Like most World War I era ships, there is minimal superstructure: bridge, amidships boat deck and
funnel casings. The bridge is made up from seven pieces, the boat deck has twelve supports to be fitted
underneath, and the after funnel casing consists of two pieces.
All of these parts are detailed on every face: hatches with hinges, portholes with ‘eyebrows’, boat
chocks, bollards, deck planks, and slots or raised edges for fitting other pieces.
The bridge has a different searchlight layout than Hiei and Haruna and has solid lower bulkheads. In comparison to
Kongo, the navigation bridge is atop the conning tower, the searchlight platform extends aft to the foremast, and
the boat deck is not as wide.
—– Bridge pieces and boat deck —–
Kirishima was fitted with 8-14”/45, 16-6”/50, and 4-3” guns when first completed. All these weapons are
present in the kit.
The main 14” turrets are in two pieces and have separate barrels. The super-firing turrets have separate
rangefinders; the lower turrets have no rangefinders. The rangefinder on No.2 turret is smaller than the
one on turret No. 3; turret No.2 and its rangefinder are on a separate sprue. All of the turrets feature
raised armour plates, rivet detail, and ladders between the gun barrels. The gun barrels themselves are
tapered, have a thicker section towards the breech and are hollowed out at the muzzle.
The 6” guns are in two pieces, a casemate mounting with detailed sighting ports, and separate barrels.
The barrels are remarkably thin and have a very fine taper, equal to the best of the machined gun
barrels commercially available.
The 3” guns feature plenty of raised detail.
The 14” turrets are same as those supplied for Haruna, gently rounded at the front and sides while those for Kongo
and Hiei are angular. The positioning of the 3” guns on the forecastle deck matches that for Hiei and Haruna, those
for Kongo are fitted in different positions.
—– New rounded 14” gun turrets with barrels —–
—– 6” gun turrets and barrels, unused turret bottoms, and the new sprue for Turret No. 2—–
There are twelve open boats and three steam launches, each one featuring very precise deck planks.
The open boats have cut-outs for the oars and the steam launches have detailed skylights, deck fittings,
and separate funnels.
The boat layout is the same as Haruna’s.
—– Boats —–
There are many smaller fittings, every piece of which is incredibly detailed. The many winches have
detailed motors and components, the anchors have raised detail, range finders have caps on the ends,
steam pipes have rings, the davits are extremely thin, searchlights have defined lenses, and the torpedo
net booms have rings around them. There are two searchlight platforms with very well executed lattice
work, despite being solid instead of hollow. There are even two gash chutes and a stern walk.
The masts and tripod supports are extremely thin and well detailed. The foremast has finely detailed
rungs and the mainmast has attachment points for the boom of the boat crane. The yards are already
fitted to the topmasts. Each mast has a starfish and control position made up of separate parts. There
are also two additional open boats and no less than seven funnels counting the two found with the 14”
gun turrets; the instructions make it very clear which three are to be used. The funnels are hollow single
pieces with engraved hand rails, separate caps with open grillwork, and separate steam pipes.
In common with Hiei and Haruna, the fore-funnel is higher and positioned further aft than the one fitted to Kongo.
The forward two funnels are the same as those fitted to Hiei with the external steam pipes fitted to the middle
funnel. The searchlight platforms are larger than those fitted to Hiei and Haruna.
—– Funnels and fittings —–
—– Masts, funnels, and additional fittings —–
The decals consist of two Japanese naval jacks.
—– Weight and Decals —–
The instructions come on a single large, double-sided full-colour page. They are very clear and
comprehensive and feature a drawing showing all the included sprues. There are eleven assembly steps
with sub-assemblies and exploded drawings as required. Some colour coding is used to assist with the
placement of smaller parts; this eliminates a lot of guess work.
—– Instructions —–
There is a full-colour diagram of the overall dark grey scheme worn by Kirishima with references to the
Mr. Hobby and Tamiya paint ranges.
—– Colour scheme —–
This is a superb kit that accurately captures Kirishima as she first appeared upon completion. Modellers
can now build any of the Kongo class as they looked when they first entered service; a very happy state
of affairs that was unimaginable even a few years ago.
Kajika has taken great care to identify the subtle differences in the four ships and make the required
changes to their moulds and instructions. The detailing on every part is extremely fine and precise.
There are only a few small parts and most modellers will have no trouble with assembly. The build will
be very straightforward, each step is well laid out and there are no complex superstructures, multiple
anti-aircraft guns, or aircraft to assemble.
The technical level of manufacturing is quite amazing with an outstanding level of detailing. There is
absolutely no flash on any of the pieces, no ejection pin markings, and none of those lines that result
when two mould halves are used to make a single component. The plastic is quite durable; it stands up
to very rough handling without any breakage.
This kit will build into a nice replica right out of the box. The only things that could be added to the kit
would be a railing for the stern walk and a rolled up torpedo net for the net shelf, both very minor
Summary of differences from Kongo:
Kongo’s hull has ladder rungs just aft of the anchors and square ports at the stern; Kirishima’s hull has neither of
those features. Kirishima’s navigation bridge is atop the conning tower, the searchlight platform extends aft to the
foremast, and the boat deck is not as wide. Kirishima’s 14” turrets are gently rounded at the front and sides,
Kongo’s are angular. The positioning of the 3” guns on the forecastle deck and the boat layout is different. The
fore-funnel is taller and positioned further aft than the one fitted to Kongo.
Summary of differences from Hiei:
Hiei’s hull, funnels, and positioning of the 3” guns are the same as the Kirishima. The Kirishima’s boat layout is
slightly different, the bottom bulkheads on the bridge are solid, and the searchlight platforms are larger.
Kirishima’s 14” turrets are gently rounded at the front and sides while those for Hiei are angular.
Summary of differences from Haruna:
Haruna’s hull, main gun turrets, funnel placement, boat layout, and positioning of the 3” guns are the same as the
Kirishima; Kirishima’s searchlight platforms are larger. Kirishima’s bottom bridge bulkheads are solid, and the
searchlights on the bridge are in different positions than on Haruna; Krishima’s rangefinder atop Turret No.2 is
smaller than Haruna’s. Kirishima’s middle funnel has external steam pipes, those pipes are on the fore funnel on
This is a highly recommended kit and will make an excellent addition to any collection. It will make an
interesting comparison when placed alongside kits of her World War One contemporaries, Derfflinger,
Lion, or Tiger. The changes made to the ship between her first commissioning and her Second World
War appearance will be quite evident when placing this kit alongside one of Kirishima after
Well done to Kajika for producing this kit of the fourth Kongo to such an incredible level of detail.
- The Battlecruisers of the Kongo Class by Hans Lengerer Warship 2012 Conway 2012
- Battleships of World War I by Antony Preston. Galahad Books 1972
- IJN Kongo Battleship1912-1944 – Profile Warship 12 by Masataka Chihaya and Yasuo Abe. Profile Publications 1971
- IJN Kongo Class Battleships by Steve Wiper Classic Warships Publishing 2001
- Japanese Battleships 1897-1945 by RA Burt. Seaforth Publishing 2015
Review kit courtesy of Flyhawk Models
Review ©2018 Robert G. Brown